Please note that whilst every effort is made to ensure the accuracy of the information
contained within, errors may occur.
Racks Snooker and Pool Bar can accept no responsibility for losses or damages caused. Prices shown are intended as a guide and may change.
© Copyright Racks Snooker & Pool Bar 2016
Peradon Blaze Three Quarter Ash 8-Ball Pool Cue
Blaze 3/4 Jointed 8 Ball Pool Cue
This 55" inch cue is crafted by Peradon in England from kiln dried, North American Ash and exotic Ebony. The Ash is carefully selected for strength and straightness before being turned and machine spliced to the finest Ebony butt timber. An Ebony front splice with a Rosewood inlay between two Red veneers is then spliced to the butt section to further enhance the appearance. The cue is then turned to its final tapered finish before the numerous sanding and finishing processes are undertaken to achieve a 'silk smooth' finish. To eliminate joint problems the two sections of the 'quick action' joint are each precision turned from a single piece of solid brass and precisely fitted through the points 16" from the butt end to give the shaft length of 39". On this cue the shaft is fitted with the female section of the joint, whilst the butt is fitted with the male. Cleverly, this enables the player to remove the 16" butt section of the cue and screw the 6" mini butt (supplied with the cue) directly into the shaft. This makes a 45" cue for those occasional awkward shots in restricted spaces. The butt of the cue is also fitted with a 'quick action' butt end joint which will also accept the 6" mini butt supplied with the cue. This lengthens the cue to 61" enabling the player to use the cue more easily on some shots that require a rest. The butt is finished with a Peradon Blaze name disc. This cue features a solid brass ferrule and 8 to 8.5mm Elkmaster tip
Cue Length: 55" (140cm)
Shaft Length: 39" (99cm)
Butt Length: 16" (41cm) - plus 1" (2.5cm) for the protruding male joint
Tip: 8 to 8.5mm Elkmaster tip
Shaft: Selected kiln dried North American Ash*
Butt: Machine spliced genuine Ebony
Butt Decoration: Ebony front splice with a Rosewood inlay between two
Joint: Solid brass, 'Quick Action' 16" from butt end.
Butt End Joint: Yes, Quick Action.
Mini Butt: Yes, supplied with matching 6" ebonised mini butt
Weight: Medium 16.5oz up to 17.5oz or Heavy 17.5oz up to 19oz
All sizes are nominal.
All Prices are subject to change but correct at time of publication.
Fitted with solid brass “Quick Action”
Fitted with 8 - 8.5mm Elkmaster Tips
For availability please call 01628 627732
|High Break Board|
|Single League Tables|
|Singles League Fixtures|
|Cues & Extensions|
|Cases & Accessories|